Lithiation of Anodic Magnetite-Hematite Nanotubes Formed on Iron.

Electrochemically active iron oxide nanotubes formed by anodization are of high interest as battery components in various battery systems due to their 1D geometry, offering high volume expansion tolerance and applications without the use of binders and conductive additives. This work takes a step forward toward understanding lithium-ion storage in 1D nanotubes through the analysis of differential capacity plots d(Q - Q0)·dE-1 supported by in situ Raman spectroscopy observations. The iron oxide nanotubes were synthesized by anodizing polycrystalline iron and subsequently modified by thermal treatment in order to control the degree of crystallinity and the ratio of hematite (Fe2O3) to magnetite (Fe3O4). The electrochemical fingerprints revealed a quasi-reversible lithiation/delithiation process through Li2O formation. Significant improvement in electrochemical performance was found to be related to the high degree of crystallinity and the increase of the hematite (Fe2O3) to magnetite (Fe3O4) ratio. In situ mechanistic studies revealed a reversible reduction of iron oxide to metallic iron simultaneously with Li2O formation.

Facile synthesis approach of bifunctional Co-Ni-Fe oxyhydroxide and spinel oxide composite electrocatalysts from hydroxide and layered double hydroxide composite precursors.

Zinc-air batteries (ZABs) are promising candidates for the next-generation energy storage systems, however, their further development is severely hindered by kinetically sluggish oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Facile synthesis approaches of highly active bifunctional electrocatalysts for OER and ORR are required for their practical applications. Herein, we develop a facile synthesis procedure for composite electrocatalysts composed of OER-active metal oxyhydroxide and ORR-active spinel oxide containing Co, Ni and Fe from composite precursors consisting of metal hydroxide and layered double hydroxide (LDH). Both hydroxide and LDH are simultaneously produced by a precipitation method with a controlled molar ratio of Co2+, Ni2+ and Fe3+ in the reaction solution, and calcination of the precursor at a moderate temperature provides composite catalysts of metal oxyhydroxides and spinel oxides. The composite catalyst shows superb bifunctional performances with a small potential difference of 0.64 V between a potential of 1.51 V vs. RHE at 10 mA cm-2 for OER and a half-wave potential of 0.87 V vs. RHE for ORR. The rechargeable ZAB assembled with the composite catalyst as an air-electrode exhibits a power density of 195 mA cm-2 and excellent durability of 430 hours (1270 cycles) of a charge-discharge cycle test.

Evaluation of Antifungal Properties of Titania P25.

Commercial titania photocatalyst­P25 was chosen for an antifungal property examination due to it exhibiting one of the highest photocatalytic activities among titania photocatalysts. Titania P25 was homogenized first (HomoP25) and then annealed at different temperatures. Additionally, HomoP25 was modified with 0.5 wt% or 2.0 wt% of platinum by a photodeposition method. The obtained samples were characterized by diffuse-reflectance spectroscopy (DRS), X-ray photoabsorption spectroscopy (XPS), X-ray diffraction (XRD) and Raman spectroscopy. Moreover, photocatalytic activity was tested for methanol dehydrogenation under UV/vis irradiation. The spore-destroying effect of photocatalysts was investigated against two mold fungal species, i.e., Aspergillus fumigatus and Aspergillus niger. Both the mycelium growth and API ZYM (estimation of enzymatic activity) tests were applied for the assessment of antifungal effect. It was found that annealing caused a change of surface properties of the titania samples, i.e., an increase in the noncrystalline part, a growth of particles and enhanced oxygen adsorption on its surface, which resulted in an increase in both the hydrogen evolution rate and the antifungal effect. Titania samples annealed at 300−500 °C were highly active during 60-min UV/vis irradiation, inhibiting the germination of both fungal spores, whereas titania modification with platinum (0.5 and 2.0 wt%) had negligible effect, despite being highly active for hydrogen evolution. The control experiments revealed the lack of titania activity in the dark, as well as high resistance of fungi for applied UV/vis irradiation in the absence of photocatalysts. Moreover, the complete inhibition of 19 hydrolases, secreted by both tested fungi, was noted under UV/vis irradiation on the annealed P25 sample. It is proposed that titania photocatalysts of large particle sizes (>150 nm) and enriched surface with oxygen might efficiently destroy fungal structures under mild irradiation conditions and, thus, be highly promising as covering materials for daily products.

Slippery Liquid-Infused Porous Surfaces on Aluminum for Corrosion Protection with Improved Self-Healing Ability.

Slippery liquid-infused porous surfaces (SLIPSs) can be formed by impregnating lubricants in porous surfaces with low surface energy. In this study, SLIPSs have been obtained on practically important aluminum with a porous anodic alumina layer by impregnating lubricants containing organic additives. The additive-containing lubricants change the surface slippery even without prior organic coating of the porous alumina surface. The additive-containing SLIPSs reveal a low water sliding angle of <5° and markedly improved corrosion resistance in an acetic acid solution containing chloride. The SLIPSs are formed by the in situ adsorption of the organic additives on the porous alumina surface. The scratched defects induce corrosion of the organic coating-type SLIPSs, whereas the additive-containing SLIPSs sustain high corrosion resistance even after introducing scratch defects. The adsorption of the organic additive in lubricants and refilling of the lubricant are responsible for the self-healing of the corrosion resistance. Thus, the additive-containing SLIPSs are promising self-healing corrosion-resistant surfaces.

In Situ Activation of a Manganese Perovskite Oxygen Reduction Catalyst in Concentrated Alkaline Media.

The reaction pathway of the oxygen reduction reaction (ORR) is strongly affected by the electrolytic environment. Meanwhile, the ORR mechanism on transition-metal oxide catalysts has not been studied intensely in very concentrated alkaline solutions that are used in practical metal-air batteries. Herein, we report the in situ activation of ORR catalysis on manganese perovskite in a concentrated alkaline solution, mediated by the spontaneous formation of oxygen vacancy sites. Electrochemical analyses of the (100) epitaxial film electrodes reveal that the exchange current and electron number of the ORR on La0.7Sr0.3Mn0.9Ni0.1O3 significantly increase with the duration of the ORR when the KOH concentration is greater than 4 M. However, these values remain unchanged with time at less than 1 M KOH concentration. Operando synchrotron X-ray spectroscopy of the (100) epitaxial film confirmed that La0.7Sr0.3Mn0.9Ni0.1O3 involves the oxygen vacancy sites with the reduction of Mn atoms in concentrated KOH solution via the hydroxylation decomposition of perhydroxyl intermediates. Hence, the O2 adsorption switched from an end-on to a bidentate mode because the cooperative active sites of the oxygen vacancy and neighboring Mn allow bidentate adsorption of the dissolved O2. Due to the simultaneous interaction with the oxygen vacancy and Mn sites, the O-O bonds are activated and the potential barrier for the electron transfer to adsorbed O2 is lowered, resulting in a shift in the reaction mechanism from that involving an indirect "2 + 2" transfer pathway to a direct 4-electron pathway.

Activation of Catalytically Active Edge-Sharing Domains in Ca2FeCoO5 for Oxygen Evolution Reaction in Highly Alkaline Media.

Rechargeable zinc-air batteries are considered as one of the possible candidates to replace conventional lithium-ion batteries. One of the requirements for effective battery operation is an oxygen evolution reaction (OER) that needs to be generated in a highly alkaline electrolyte. The A2BB'O5 brownmillerite-type Ca2FeCoO5 electrocatalyst having a 57 Pbcm symmetry exhibits very high electrocatalytic activity toward OER in 4 mol dm-3 KOH. Our studies show that the electrocatalyst undergoes bulk amorphization upon OER and adequately activates catalytically active domains. The synchrotron radiation studies using the extended X-ray absorption fine structure (EXAFS) technique show that the central structural unit found in the polarized Ca2FeCoO5 is a cluster of edge-sharing CoO6 octahedra. The electrochemical data indicate that OER preferentially takes place on the edge-sharing CoO6 octahedra catalytic centers reconstructed in the brownmillerite-type electrocatalyst. The EXAFS second shell peaks at an interatomic distance of 2.8 Å are the fingerprints of the catalytically active domains.

High dispersion and oxygen reduction reaction activity of Co3O4 nanoparticles on platelet-type carbon nanofibers.

In this study, platelet-type carbon nanofibers prepared by the liquid phase carbonization of polymers in the pores of a porous anodic alumina template were used to prepare the Co3O4/carbon electrocatalysts. For comparison, Co3O4 nanoparticles were also deposited on multiwall carbon nanotubes (MWCNTs). Both the nitrogen-free platelet-type carbon nanofibers (pCNFs) and the nitrogen-containing analogue (N-pCNFs) exhibited better dispersion and higher amount of deposited Co3O4 nanoparticles compared to the MWCNTs. In addition, many individual Co3O4 nanoparticles were deposited separately on pCNF and N-pCNF, whereas aggregated deposition was commonplace on MWCNTs. The results indicated that the side wall of the pCNFs, which consisted of carbon edge planes, was the preferential nucleation site of Co3O4 nanoparticles rather than the basal planes of carbon that predominated the surface of the MWCNTs. The oxygen reduction reaction (ORR) activity of the Co3O4/pCNF composite in 0.1 mol dm-3 KOH solution was better than that of Co3O4/MWCNTs. The N-pCNF further enhanced the ORR activity of the Co3O4/pCNFs even though the dispersion and supported amount of Co3O4 nanoparticles were negligibly affected by the presence of the nitrogen species. Synergistic interactions of the Co3O4 nanoparticles with N-doped CNFs contributed to the increased ORR activity.

High-Efficiency Direct Ammonia Fuel Cells Based on BaZr0.1Ce0.7Y0.2O3- δ /Pd Oxide-Metal Junctions.

A direct ammonia-type intermediate temperature fuel cell is examined by means of a hydrogen membrane fuel cell (HMFC) comprising 1-µm-thick BaZr0.1Ce0.7Y0.2O3- δ (BZCY) thin-film electrolyte and Pd solid anode. It generates the maximum power density of 0.58 W cm-2 at 600 °C with ammonia fuels, and this value is found to be three times larger than the champion data of the recently reported direct ammonia-type proton-conducting ceramic fuel cells (PCFCs). AC impedance spectroscopy is performed to determine the interfacial polarization resistances, disclosing that the anodic overpotentials of HMFCs are at least one order of magnitude smaller than those of anode-supported PCFC under relatively high DC outputs. The anode reactions are driven by the oxidation of monoatomic hydrogen dissolving at the BZCY/Pd solid-solid interface, mediated via proton transfer from Pd to BZCY. The electrochemical analysis reveals that the BZCY/Pd junction forms Ohmic contact without growth of wide depletion layer and thus facilitates the proton transfer reactions because the interfacial region beneath Pd electrode can accommodate amounts of protonic defects as well as the bulk of BZCY due to the small depletion of holes under hole-proton thermodynamic equilibrium.

Brownmillerite-type Ca2 FeCoO5 as a Practicable Oxygen Evolution Reaction Catalyst.

Here, we report remarkable oxygen evolution reaction (OER) catalytic activity of brownmillerite (BM)-type Ca2 FeCoO5 . The OER activity of this oxide is comparable to or beyond those of the state-of-the-art perovskite (PV)-catalyst Ba0.5 Sr0.5 Co0.8 Fe0.2 O3-δ (BSCF) and a precious-metal catalyst RuO2 , emphasizing the importance of the characteristic BM structure with multiple coordination environments of transition metal (TM) species. Also, Ca2 FeCoO5 is clearly advantageous in terms of expense/laboriousness of the material synthesis. These facts make this oxide a promising OER catalyst used in many energy conversion technologies such as metal-air secondary batteries and hydrogen production from electrochemical/photocatalytic water splitting.

Advanced geometries of PEDOT formed in titania nanotubes.

In and out of tube: Robust poly-3,4-ethylene-dioxythiophene nanostructures in the form of nanopore arrays and inverse nanotube arrays are obtained by site-selective deposition into TiO(2) nanotubes. The deposition process critically depends on the applied potential and is in line with three-dimensional (3D) progressive and 3D instantaneous nucleation-growth mechanism, leading to the construction of polymer blocks or polymer/semiconductor hybrids.

Flow-injection preconcentration of chloramphenicol using molecularly imprinted polymer for HPLC determination in environmental samples.

The residue of antibiotic chloramphenicol (CAP) is important issue for food quality control and also for the environmental monitoring. It is banned for use in food-producing animals and has very limited use in human medicine, because of its severe impact on human health. Determination of trace level of CAP in environmental samples requires a very sensitive analytical method and efficient preconcentration procedure. CAP can be efficiently preconcentrated in flow-injection system using flow-through reactor packed with molecularly imprinted polymer (MIP), but determination of CAP in eluate from MIP requires the application of chromatographic separation, which was made in reversed-phase HPLC system with UV detection. In optimized conditions the limit of detection for 100 mL sample in HPLC with offline preconcentration on MIP was evaluated as 0.66 mg/L. In hyphenated FIA-HPLC system with zone sampling the LOD for developed method was evaluated as 15 ng/L, which indicates the possibility of using it for analysis of environmental samples.

Polypyrrole self-organized nanopore arrays formed by controlled electropolymerization in TiO2 nanotube template.

A new concept for formation of nanostructured intrinsically conducting polymers (ICP) is demonstrated. Polypyrrole can be electropolymerized from an ionic-surfactant-solution in TiO(2) nanotube framework to form a geometrical structure of self-organized nanopore arrays. Polymerization is initialized selectively in the space between nanotube walls forming a mechanically stable polymer network with controlled wall thickness from 40 to 10 nm. Such robust polymer nanostructures are very promising for application in electrochemical systems of limited charge carrier diffusion length.